Owning a home can be a dream come true, but the world of home ownership is more than just relaxing weekends on the deck and intimate evenings in front of the fireplace. It requires a commitment to keeping your private oasis safe and running smoothly. Making occasional repairs is part of the bargain, and even if you aren't a dedicated do-it-yourselfer (DIY), there are a few around-the-house fixes you should become familiar with.
Two-part epoxy glue is rock-hard, fills huge gaps, bonds to almost anything and dries very quickly. Some brands now come with an applicator tip that automatically mixes the two parts so you can spread it like a regular glue, without mixing. It’s perfect for gluing irregular shapes and dissimilar materials to each other. Most epoxies set in five minutes, but you can buy quicker-setting types that allow you to just hold pieces in place for a minute, without any clamping. Pick up some epoxy glue on Amazon today.
How to DIY it: You should already be emptying the lint trap before every load of laundry. To do a thorough cleaning of the dryer and its vent duct system, unplug the machine (and turn off the gas valve if it has one). Pry off the access panel on the front (try a putty knife covered with duct tape to prevent scratching) and vacuum around the motor and heating element (above). Then carefully disconnect the vent duct tubing from the back of the dryer and use a dryer vent brush (about $10 at home 
centers; look for one that also cleans refrigerator coils) to pull out any 
accumulated lint. Aim to do this at least once a year.
When a home is sold, inspections are performed that may reveal environmental hazards such as radon gas in the basement or water supply or friable asbestos materials (both of which can cause lung cancer), peeling or disturbed lead paint (a risk to children and pregnant women), in-ground heating oil tanks that may contaminate ground water, or mold that can cause problems for those with asthma or allergies. Typically the buyer or mortgage lender will require these conditions to be repaired before allowing the purchase to close. An entire industry of environmental remediation contractors has developed to help home owners resolve these types of problems.
Depending on where you live, national averages can seem like a steal. Rene Artale’s four-bedroom house near Newcastle, in Westchester County, N.Y., suffered some damage during a storm last winter. A tree fell in the yard, damaging her fence, arbor and retaining wall. And heavy snow caused her roof to leak. The repair bills just kept piling up. Removing the tree, $3,800. Repairing the wall, $4,000. Fixing the roof, $3,800. Fixing the picket fence, $2,800. “It’s obscene,” Ms. Artale, 47, said.
Upholstery shops charge almost $200 to fix tears in your seats. You can do it yourself in a few hours with a vinyl and leather repair kit (less than $20) from any auto parts store. You’ll have to practice a bit to get the right color mix and it might not be a perfect match when you’re done, but it’s a heck of a lot better than driving around with torn seats. Start by gluing reinforcing fabric onto the underside of the torn vinyl or leather. Then mix the heat-set filler to match your fabric color and apply it to the tear. Next, find a textured mat that most closely resembles the texture of your vinyl or leather and place it onto the liquid filler. Heat the patching tool with a clothes iron and press it onto the textured mat. Remove the patching tool, but leave the textured mat in place until the patch cools. Then peel it off. Get the full story on repairing leather here.
If you can’t see any telltale flow marks, and since the stain is fairly small, look at the underside of the roof for ‘shiners.’ A shiner is a nail that missed the framing member, in this case when the carpenter nailed the roof sheathing to the rafters. Moisture that escapes into the cold attic from the rooms below often condenses on cold nails. Sometimes you can spot this if you climb up into your attic on a cold night. The nails will look white because they’re frosted. When the attic heats up a bit during the day, the frost melts and drips, then the nails frost up at night again and so on. The solution is to simply clip the nail with a side-cutting pliers.

Simple fixes for the four most common refrigerator problems: an ice-maker breakdown, water leaking onto the floor, a cooling failure and too much noise. Chances are, you can solve the problem yourself, save some money and avoid the expense and inconvenience of a service appointment. The following article will walk you through the simplest solutions to the most common fridge malfunctions. Learn how to repair a refrigerator here.
Workers often have strong backgrounds in some areas—say, carpentry—and know enough to do small jobs related to other trades. If your list primarily consists of projects related to one type of work, ask prospective companies if they have workers with expertise in that area. We get scads of complaints from consumers who hire jacks-of-all-trades but get workers who don’t have the knowledge or skill to complete work satisfactorily.

Do you have icicles forming on your nose while you're inside? Perhaps you need home heating and air conditioning help. Learn all about different heating systems including radiant heating, baseboard heating and more. (But when there's so much hot air in your house, you could fry an egg on the floor, please let us help you find a repair guy.) See All Heating & Cooling
You'll get an email from your pro to confirm the date, time, and other details. Please be prepared to provide your pro the exact list of projects you would like them to complete and, wherever possible, related product URLs. During appointment scheduling, you will have the option to allow the provider to contact you to discuss the projects and tools needed in more detail.
Protecting you and your home is our No.1 priority. Every member of our team takes the company credo to heart; treating each customer like family and every home - like our own. It’s not easy trusting a stranger with your most cherished investment. Our skilled and experienced repairmen will earn your trust by listening carefully to your needs and delivering stunning results. We are so confident in our home repair services, we back our work with an ironclad guarantee.
If you are willing to buy and pick up the materials yourself, you avoid paying for shopping and pick-up time. But you may find it inconvenient, strenuous, and time-consuming to pick up a load of bricks, a few large sheets of plywood, or similar items. If the company will be doing the shopping and buying, get the company to commit to the time and cost for that task; some will agree that there will be no extra charge.
If you can’t see any telltale flow marks, and since the stain is fairly small, look at the underside of the roof for ‘shiners.’ A shiner is a nail that missed the framing member, in this case when the carpenter nailed the roof sheathing to the rafters. Moisture that escapes into the cold attic from the rooms below often condenses on cold nails. Sometimes you can spot this if you climb up into your attic on a cold night. The nails will look white because they’re frosted. When the attic heats up a bit during the day, the frost melts and drips, then the nails frost up at night again and so on. The solution is to simply clip the nail with a side-cutting pliers.
This master bath had a few likeable options. Heated tile floors, done by Gabriel tile, Moen U connect faucet that runs via your phone app, double vanity, extra outlet on the right side, humidity sensing fan to eliminate mold and mildew build up. Paint by Father & Son Painting, electrical was LED and done by Heimlich Electric. All plumbing fixtures were Moen, toilet by Kohler.
When Scott began the rebuilding of my shower stall, he discovered something very unexpected! When he removed part of the floor to make the shower stall larger, he discovered water damage and black mold all over the sub-floor. Apparently our toilet had been leaking, just slightly, under the floor with every flush! We had no knowledge that this had been going on for years!
CONSTRUCTION AND MAINTENANCE you are free to ask any questions We are number one services one provider in all types of handyman jobs i.e PLUMBERS bathroom renovations , Geysers replacement geysers installation and repair bath tab, Toilet, basin, sink, washing machine pipe install, leaking pipes, blocked drains bust pipes,and more HANGING fitting doors, Replacing doors, hanging picture frame ...
When a home is sold, inspections are performed that may reveal environmental hazards such as radon gas in the basement or water supply or friable asbestos materials (both of which can cause lung cancer), peeling or disturbed lead paint (a risk to children and pregnant women), in-ground heating oil tanks that may contaminate ground water, or mold that can cause problems for those with asthma or allergies. Typically the buyer or mortgage lender will require these conditions to be repaired before allowing the purchase to close. An entire industry of environmental remediation contractors has developed to help home owners resolve these types of problems.
Periodic maintenance also falls under the general class of home repairs. These are inspections, adjustments, cleaning, or replacements that should be done regularly to ensure proper functioning of all the systems in a house, and to avoid costly emergencies. Examples include annual testing and adjustment of alarm systems, central heating or cooling systems (electrodes, thermocouples, and fuel filters), replacement of water treatment components or air-handling filters, purging of heating radiators and water tanks, defrosting a freezer, vacuum refrigerator coils, refilling dry floor-drain traps with water, cleaning out rain gutters, down spouts and drains, touching up worn house paint and weather seals, and cleaning accumulated creosote out of chimney flues, which may be best left to a chimney sweep.
The average single-family homeowner spends around $2,000 a year on maintenance, according to Bankrate.com. That is considerably less than the monthly fees for most condos or co-ops. But even though the monthly outlay for those homeowners might be lower than that of condo or co-op owners, house owners generally are not squirreling away those savings for a rainy day. Nearly half of them have less than $1,000 saved, and a third have nothing saved, according to Liberty Mutual Insurance. So when that sump pump suddenly fails, odds are, we’re scrambling to pay the plumber for a new one.
Generally the job of paid handyman is low status, a semi-skilled labor job. It's a less prestigious occupation than a specialist such as a plumber, electrician, or carpenter. With the emergence of large national chains, an effort is being made to change that perception, by emphasizing professionalism and the fact that a handyman is actually a technician with multiple skills and a wide range of knowledge. At the same time, unpaid homeowners skilled at repairs are valued for saving money. And handyman tools sometimes become useful in different places: for example, when a proper neurological drill was not available, an Australian doctor used a handyman's drill in 2009 to open a hole in the head of a 13-year-old boy to relieve pressure after a brain injury; the boy's life was saved.[11]
It is instinctual for homeowners to contact an HVAC tech when they notice irregularities in their cooling or heating system. These irregularities could be a direct result of a dirty or clogged air filter. We encourage homeowners to check their filters and replace if necessary. It’s also beneficial for homeowners with pets, carpet, or for homes near fields or construction zones to have multiple filters for convenient replacement.
If you have shallow scratches or nicks, hide them with a stain-filled touch-up marker. Dab on the stain and wipe off the excess with a rag. But beware: Scratches can absorb lots of stain and turn darker than the surrounding finish. So start with a marker that’s lighter than your cabinet finish and then switch to a darker shade if needed. For deeper scratches, use a filler pencil, which fills and colors the scratch. Or, try using a walnut to remove scratches in wood!
Keeping your home in tip-top shape takes time, energy, and skill. Not everyone is the handy type, and that’s OK! We all have our strengths. Home repair services happen to be ours. From leaky faucets and insufficient attic insulation to rooftop damage and clogged gutters, you can depend on Brothers Services to keep your home working for you, not against you.
How to DIY it: There are lots of ways to clear a drain, so start with the easiest one. If your sink has a pop-up stopper, remove that and clean it. If that doesn’t do the trick, fill the sink with 3 or 4 inches of water and use a plunger to plunge the sink (plug the overflow hole with a wet rag first). Still slow? Try snaking the drain pipe with a metal hanger or a pipe-cleaning tool (sold at hardware stores for about $2).
Before you can even think about remodeling, you need your home to be in good condition. That’s why Michael & Son Services includes a handyman department as part of our house remodeling business. We do a wide range of tasks, from fixing leaks and caulking to painting to full replacement of various interior and exterior features. Our licensed contractors and technicians quickly and carefully diagnose any issues you’re having and let you know what needs to be done to rectify them. We put your safety first and work as fast as possible with quality intact.
Many towns have handymen who work part-time, for friends or family or neighbors, who are skilled in a variety of tasks. Sometimes they advertise in newspapers or online. They vary in quality, professionalism, skill level, and price. Contractors often criticize the work of previous contractors, and this practice is not limited to handymen, but to all trades.[13] Handymen have advertised their services through flyers and mailings; in addition, free websites such as Craigslist and SkillSlate help customers and handymen find each other.[14]
How to DIY it: Turn it off by opening the disconnect box (typically located on the outside wall near the unit) and pulling out the disconnect block inside (above). Now take a good look at the unit. If the vents are caked with fuzz from dandelions or cottonwood trees, vacuum the vents. Then rinse the unit with a hose using moderate pressure (the flimsy fins might bend under strong pressure). As you spray, peer down into the unit. You should see water streaming through. If not, the fins are still clogged, so keep rinsing.
For quality, affordable and reliable service provider for all your handyman needs call Kelvin fast and reliable –From Basic home maintenance such as repairs, carpentry and leak repair to specialized services such as plumbing solutions, waterproofing and electrical work and building projects .PLUMBING - Can will take care of your kitchen and bathroom installations, blockages and water leaks quickl ...
Owning a home can be a dream come true, but the world of home ownership is more than just relaxing weekends on the deck and intimate evenings in front of the fireplace. It requires a commitment to keeping your private oasis safe and running smoothly. Making occasional repairs is part of the bargain, and even if you aren't a dedicated do-it-yourselfer (DIY), there are a few around-the-house fixes you should become familiar with.
Anyone you hire to work in or around your home should have two types of insurance: general liability and worker’s compensation. General liability covers damages if, for example, a ladder smashes through your (or your neighbor’s) window. Worker’s comp covers injuries if a worker falls off a ladder. If the company doesn’t have these coverages, you could be stuck paying claims.

Ask about companies’ hourly labor rates and how many workers are included in the rates (some send two workers to every job). Also ask about minimum charges. Many handyperson services have minimums of two hours or more, and some tack on a half-hour of labor or more for travel time (most home services charge the same fees for travel time regardless of where customers live). If the jobs on your list can be done in an hour, don’t hire a company that charges a three-hour minimum. Because many handyperson services bill labor charges in one-hour increments, have a few optional jobs ready in case you need to fill up a worker’s hour.
Generally the job of paid handyman is low status, a semi-skilled labor job. It's a less prestigious occupation than a specialist such as a plumber, electrician, or carpenter. With the emergence of large national chains, an effort is being made to change that perception, by emphasizing professionalism and the fact that a handyman is actually a technician with multiple skills and a wide range of knowledge. At the same time, unpaid homeowners skilled at repairs are valued for saving money. And handyman tools sometimes become useful in different places: for example, when a proper neurological drill was not available, an Australian doctor used a handyman's drill in 2009 to open a hole in the head of a 13-year-old boy to relieve pressure after a brain injury; the boy's life was saved.[11]
Other competitors include online referral services.[10] In addition, some large home centers offer installation services for products such as cabinets and carpet installation.[16] Sometimes homeowners contact a professional service after trying, but failing, to do repair work themselves; in one instance, a Minneapolis homeowner attempted a project but called a technician to finish the project, and the overall cost was substantial.[19]
Sooner or later, every sprayed ceiling is going to get a water stain or a scrape. Spray texture in a can won’t perfectly match every ceiling texture, but it’s usually close, and a lot easier than respraying a whole ceiling. Before spraying, seal the patch with a stain-blocking primer, cover the floor and furniture, and practice your technique on scrap plywood or cardboard. Buy ceiling texture on Amazon now.

How to DIY it: This job can be messy, so protect nearby surfaces by covering them with plastic or cardboard. Spray the springs with garage door lubricant (about 
$7 at home centers). Don’t use oil, grease, or other lubricants. They may be cheaper, or you may have them on hand already, but they won’t work as well and tend to pick up dust and grit—just what you don’t want on moving parts. 

If you have shallow scratches or nicks, hide them with a stain-filled touch-up marker. Dab on the stain and wipe off the excess with a rag. But beware: Scratches can absorb lots of stain and turn darker than the surrounding finish. So start with a marker that’s lighter than your cabinet finish and then switch to a darker shade if needed. For deeper scratches, use a filler pencil, which fills and colors the scratch. Or, try using a walnut to remove scratches in wood!


How to DIY it: Gently tug the loose part of the carpet to find the point where it’s still attached. Snip 
it off as close to the backing as possible and save it. Use painter’s tape to surround the repair area. Squeeze 
a heavy bead of carpet seam sealer (about $6 at home centers) into the run. Then fill in the hole with the saved fiber, using a screwdriver to press it into the sealer bit by bit until the area looks like the surrounding 
carpet (below).
Every remodeling job starts off with home building plans including detailed floor plans. Next comes the demolition (and a great opportunity to vent off some steam). We can offer you advice on all home renovation jobs big and small, from building modular homes to log homes and from home theater design to closet design. See All Building & Home Improvement
You'll get an email from your pro to confirm the date, time, and other details. Please be prepared to provide your pro the exact list of projects you would like them to complete and, wherever possible, related product URLs. During appointment scheduling, you will have the option to allow the provider to contact you to discuss the projects and tools needed in more detail.

Instead of forking over $5,000-10,000 to replace all of your old windows with brand new ones, consider repairing old windows yourself. With a few hundred dollars in supplies (sand paper, paint, window glaze, etc.), you’ll be prepared to reglaze every window in your house. Though it can be a tad time consuming, you can prioritize the project by room, removing windows one by one to paint, reglaze, and, if necessary, replace any cracked glass. Get started glazing your windows here.
The table below reports labor charges for one to six hours of work (per worker) for a sample of area handyperson services. (Rates were collected by our telephone shoppers who did not disclose their affiliation with Consumers' Checkbook.) As you can see, there are big differences: For one hour of work, you can pay between $50 and $259; for six hours between $300 and $774. The table also shows companies’ hourly rates.
eople Working Cooperatively, a Cincinnati-based nonprofit that serves the Greater Cincinnati area, has teamed up with the City of Cincinnati to offer the Cincinnati Lead Education and Remediation Program (CLEAR). PWC was selected by the City of Cincinnati to provide all intake applications for homeowners interested in the CLEAR program.This new program reduces lead hazards from your home and could involve repairs such as a window replacement or covering lead surfaces.You may qualify if all of the following apply to your household:A child under six resides in your home or spends at least six hours per week in your home on a regular basis You have owned and lived in your home for more than one yearYour home was built before 1978You live in one of these city neighborhoods:Bond Hill, Westend, Over-The-Rhine, Mt. Auburn, CUF, Corryville, Madisonville, Avondale, South Cumminsville, North and South Fairmount, West, East and Lower Price Hill, Walnut Hills, Evanston Northside or CarthageTo apply for the service or see if you qualify call 513-366-4699!
If you find that drawer slides are bent, rollers are broken or rollers won’t turn even after lubricating, replacement is the best solution. To keep the project simple, buy new slides that are identical (or almost identical) to the old ones. That way, replacement is an easy matter of unscrewing the old and screwing on the new. Remove a drawer track and a cabinet track and take them shopping with you. Learn how to build an under-cabinet drawer here.
How to DIY it: There are lots of ways to clear a drain, so start with the easiest one. If your sink has a pop-up stopper, remove that and clean it. If that doesn’t do the trick, fill the sink with 3 or 4 inches of water and use a plunger to plunge the sink (plug the overflow hole with a wet rag first). Still slow? Try snaking the drain pipe with a metal hanger or a pipe-cleaning tool (sold at hardware stores for about $2).
It is instinctual for homeowners to contact an HVAC tech when they notice irregularities in their cooling or heating system. These irregularities could be a direct result of a dirty or clogged air filter. We encourage homeowners to check their filters and replace if necessary. It’s also beneficial for homeowners with pets, carpet, or for homes near fields or construction zones to have multiple filters for convenient replacement.

Almost nothing is quicker, easier or refreshes a room more than a new coat of paint. Even switching up a bright white for a trendy, bright grey can change your whole perspective and give you a starting point for new colors and decoration. Gallons of paint range from $30-$50, and with primer/paint combinations, you will likely only need a gallon or less to finish an average sized room. Add another $10, and you’ll be set with rollers, paint brushes, and painter’s tape. This DIY repair could potentially save you thousands over the cost of a professional painter. Short on time? Click here to learn how to paint a room fast.

×