Simple fixes for the four most common refrigerator problems: an ice-maker breakdown, water leaking onto the floor, a cooling failure and too much noise. Chances are, you can solve the problem yourself, save some money and avoid the expense and inconvenience of a service appointment. The following article will walk you through the simplest solutions to the most common fridge malfunctions. Learn how to repair a refrigerator here.
When you book handyman service through Handy, you want to know that they are experienced and capable enough to deal with the job at hand. That’s why we ensure every professional on the Handy platform is rated and reviewed by their past customers. The requirements of different home repair jobs are never quite the same, and so we ensure that we connect you with the best handyman professionals that are able to handle your particular job.

How to DIY it: Turn it off by opening the disconnect box (typically located on the outside wall near the unit) and pulling out the disconnect block inside (above). Now take a good look at the unit. If the vents are caked with fuzz from dandelions or cottonwood trees, vacuum the vents. Then rinse the unit with a hose using moderate pressure (the flimsy fins might bend under strong pressure). As you spray, peer down into the unit. You should see water streaming through. If not, the fins are still clogged, so keep rinsing.

When that happens, all you can do is pay up, as happened with Jason Hark and Kenneth Larivee. In 2016, the couple got hit with a $28,000 assessment to replace the siding on their West Orange, N.J. townhouse in a condo association. This cost came on top of their $610 monthly association fee. After speaking with siding companies, Mr. Hark estimated that if his unit had been a stand-alone property, the project would have cost closer to $7,500. “But we couldn’t fight it,” said Mr. Hark, a director at WCBS-TV.

Every remodeling job starts off with home building plans including detailed floor plans. Next comes the demolition (and a great opportunity to vent off some steam). We can offer you advice on all home renovation jobs big and small, from building modular homes to log homes and from home theater design to closet design. See All Building & Home Improvement
A garbage disposal is a bit scary when it’s turned on and the blades are noisily chopping up kitchen waste. But, if your disposal gets stinky, fear not. It’s easy to clean out the gunk and get rid of the smell. If the splash guard needs replacing, you can do that in 20 minutes! If you need to replace the entire disposal you can replace it yourself.
If you have shallow scratches or nicks, hide them with a stain-filled touch-up marker. Dab on the stain and wipe off the excess with a rag. But beware: Scratches can absorb lots of stain and turn darker than the surrounding finish. So start with a marker that’s lighter than your cabinet finish and then switch to a darker shade if needed. For deeper scratches, use a filler pencil, which fills and colors the scratch. Or, try using a walnut to remove scratches in wood!
In addition to the major tasks like painting, renovations, and replacements, we also do little jobs. Some of these include doorknob repair, bookshelves and built-ins, and hanging pictures and curtains. Other companies won’t perform this work, but we’re happy to do it all for you at a price you can afford. Our services are so inclusive that we’ll be the only ones you need to call whenever something goes amiss in your house.

If you have shallow scratches or nicks, hide them with a stain-filled touch-up marker. Dab on the stain and wipe off the excess with a rag. But beware: Scratches can absorb lots of stain and turn darker than the surrounding finish. So start with a marker that’s lighter than your cabinet finish and then switch to a darker shade if needed. For deeper scratches, use a filler pencil, which fills and colors the scratch. Or, try using a walnut to remove scratches in wood!
To illustrate, we divided the handyperson services listed on the table below into three groups, based on their charges for four hours of work. The lowest priced one-third of the companies would charge $239 on average for four hours of work, and they were “recommended” by 96 percent of their customers whom we surveyed (see our ratings tables for handyperson services for ratings). In contrast, the highest priced one-third would charge $445 on average for four hours of work and were “recommended” by only 59 percent of their surveyed customers. Just the opposite of what many consumers would assume.
Many an amateur DIY enthusiast has spotted a job that needs doing and gone out to buy the appropriate tools, only to find that they're way out of their league. Book a handyman using the Handy app or website and you can be sure that they'll arrive with everything they’ll need to get the job done. In addition to your run-of-the-mill screwdrivers and hammers, your handyman specialist will read your job description before they arrive to ensure they come prepared for anything that your specific job may require. Don't worry about whether you’ve got the right tools for the job. Book a handyman through Handy and leave it to the professionals.
Upholstery shops charge almost $200 to fix tears in your seats. You can do it yourself in a few hours with a vinyl and leather repair kit (less than $20) from any auto parts store. You’ll have to practice a bit to get the right color mix and it might not be a perfect match when you’re done, but it’s a heck of a lot better than driving around with torn seats. Start by gluing reinforcing fabric onto the underside of the torn vinyl or leather. Then mix the heat-set filler to match your fabric color and apply it to the tear. Next, find a textured mat that most closely resembles the texture of your vinyl or leather and place it onto the liquid filler. Heat the patching tool with a clothes iron and press it onto the textured mat. Remove the patching tool, but leave the textured mat in place until the patch cools. Then peel it off. Get the full story on repairing leather here.
Risk: If your house was built 
before 1994 and still has the original plumbing fixtures, you’re using 
30 to 40 percent more water than 
a comparable new home. Because about 70 percent of the water flowing through the showerhead is hot, 
that means higher heating bills too. A basic showerhead can cost just $15 and could pay for itself in reduced water and heating costs after just one month. Calculate your 
savings at epa.gov/watersense/watersense-calculator.
×