How to DIY it: Take off the loose bar by removing the screws on each of the posts that mount the bar to the wall. (If one side is solidly attached, leave it alone.) With the mounting plate now exposed, try tightening 
the screws in it. If that doesn’t work, remove it. Chances are you’ll find two plastic anchors underneath. Poke them with 
a screwdriver and let them fall inside the wall. Replace with bigger, stronger metal toggle 
anchors (above), sold at hardware stores. Just drive them into the existing holes with a drill 
or a screwdriver, and then re­attach everything.
When vinyl windows and doors don’t operate smoothly, it’s usually because gunk has built up in the channels. But sometimes even clean windows and doors can bind. Try spraying dry PTFE spray lubricant on the contact points and wiping it off with a rag. Don’t use oil lubricants; they can attract dirt, and some can damage the vinyl. Make sure to keep your windows clean all year long with these pro tips.
Hi reader in the U.S., it seems you use Wikipedia a lot; that's great! It's a little awkward to ask, but this New Year's Eve we need your help. We depend on donations averaging about $16.36. But 98% of our readers in the U.S. are ignoring our messages, and there are only a few hours left in 2018 to help Wikipedia. If you donate just $2.75, the price of your coffee, Wikipedia could thrive. Thank you.
Almost nothing is quicker, easier or refreshes a room more than a new coat of paint. Even switching up a bright white for a trendy, bright grey can change your whole perspective and give you a starting point for new colors and decoration. Gallons of paint range from $30-$50, and with primer/paint combinations, you will likely only need a gallon or less to finish an average sized room. Add another $10, and you’ll be set with rollers, paint brushes, and painter’s tape. This DIY repair could potentially save you thousands over the cost of a professional painter. Short on time? Click here to learn how to paint a room fast.
How to DIY it: A simple cleaning often solves the problem. Start by pulling out the lower dish rack. 
Remove the spray arm and use a thin piece of wire to clean out the holes where water sprays through. Scoop or vacuum out any leftover food 
particles from the filter area, then 
remove the filter screen (above), if possible, and give it a good rinse.
Generally, in the United States, there are few legal issues if an unpaid homeowner works on a project within their own home, with some exceptions. Some jurisdictions require paid handymen to be licensed and/or insured. New Jersey, for example, requires all handymen who work in for-profit businesses serving residential and commercial customers, to be registered and insured.[21] Often handymen are barred from major plumbing, electrical wiring, or gas-fitting projects for safety reasons, and authorities sometimes require workers to be licensed in particular trades. However, minor plumbing work such as fixing water taps, connecting sinks, fixing leaks, or installing new washing machines, are usually permitted to be done without licensing. Many handymen are insured under a property damage liability policy, so that accidental property damage from negligence or accidents are covered. 

Instead of forking over $5,000-10,000 to replace all of your old windows with brand new ones, consider repairing old windows yourself. With a few hundred dollars in supplies (sand paper, paint, window glaze, etc.), you’ll be prepared to reglaze every window in your house. Though it can be a tad time consuming, you can prioritize the project by room, removing windows one by one to paint, reglaze, and, if necessary, replace any cracked glass. Get started glazing your windows here.
A handyman is not the best option for a large or complicated project that could take a long time to complete and requires the help of multiple workers. You shouldn't turn to a handyman either if you need an emergency service for plumbing, electrical or appliance work, unless the handyman is licensed in that trade. If an unlicensed person does plumbing or electrical work, you have no guarantee that the work has been done to code, which could affect your homeowners insurance policy or any claim related to the work. Use a contractor or specialist for remodeling work, room additions and projects that require heavy-duty equipment or licensed professionals like electricians.

If you have a small remodeling job or other work difficult to describe over the phone, you might be able to obtain fixed-price quotes without having to set up a bunch of appointments by emailing photos of the work area along with a detailed description of the work—the majority of the handyperson services we surveyed use email to correspond with clients.
Franchise handyman firms sometimes pitch clients by asking prospective customers about their unresolved "to-do lists".[16] The firm does odd jobs, carpentry, and repairs.[16] Trends such as a "poverty of time" and a "glut of unhandy husbands" has spurred the business.[16] Technicians do a range of services including tile work, painting, and wallpapering.[17] "One firm" charges $88 per hour.[16] The firm targets a work category which full-fledged remodelers and contractors find unprofitable.[16] A consumer was quoted by a reporter explaining the decision to hire one firm: "'I couldn't find anyone to come in and help me because the jobs were too small', said Meg Beck of Huntington, who needed some painting and carpentry done. She turned to one franchise firm and said she liked the fact that the service has well-marked trucks and uniformed technicians and that a dispatcher called with the names of the crew before they showed up."[16] There are indications that these businesses are growing.[16] There are different firms operating.[12][18]

The table below reports labor charges for one to six hours of work (per worker) for a sample of area handyperson services. (Rates were collected by our telephone shoppers who did not disclose their affiliation with Consumers' Checkbook.) As you can see, there are big differences: For one hour of work, you can pay between $50 and $259; for six hours between $300 and $774. The table also shows companies’ hourly rates.


It's a little awkward, so we'll get straight to the point: This Monday we humbly ask you to defend Wikipedia's independence. We depend on donations averaging about $16.36. But 98% of our readers in the U.S. are not responding to our messages, and time is running out to help in 2018. If everyone reading this gave $2.75, we could keep Wikipedia thriving for years to come. The price of your Monday coffee is all we need. When we made Wikipedia a non-profit, people warned us we'd regret it. But if Wikipedia were commercial, it would be a great loss. Wikipedia unites all of us who love knowledge: contributors, readers and the donors who keep us thriving. The heart and soul of Wikipedia is a community of people working to bring you unlimited access to reliable information. Please take a minute to help us keep Wikipedia growing. Thank you.
Any property repair services are only as good as the people and the tools behind them. That’s why we use only the latest repair and maintenance equipment on every job, no matter how small. Part of our job is to ensure your house is up-to-date and looking its best, so we use only the best resources available in order to make that happen. We offer a variety of handyman services throughout the DC area, including all of the following:
Roll up your sleeves and take a few minutes to master five home repairs that you can do yourself without dangerous tools or complicated instructions. Even though spending a few hours regularly on DIY home maintenance and repairs may never become your hobby of choice, knowing how to perform a few simple fixes will keep your costs down and help get the work done on your schedule instead of your contractor's.

If you have a small remodeling job or other work difficult to describe over the phone, you might be able to obtain fixed-price quotes without having to set up a bunch of appointments by emailing photos of the work area along with a detailed description of the work—the majority of the handyperson services we surveyed use email to correspond with clients.

Risk: The range hood sucks cooking fumes up and out of the kitchen. As grease splatters, it builds up and clogs the filter in the underside of the hood, keeping the fan from working as it should. This could cause your smoke alarm to go off, attract fruit flies, and leave potentially harmful pollutants from your gas or electric range lingering in the air. And if you have to replace the motor, it will cost around $200.
If you find that drawer slides are bent, rollers are broken or rollers won’t turn even after lubricating, replacement is the best solution. To keep the project simple, buy new slides that are identical (or almost identical) to the old ones. That way, replacement is an easy matter of unscrewing the old and screwing on the new. Remove a drawer track and a cabinet track and take them shopping with you. Learn how to build an under-cabinet drawer here. 

HANDYMAN CREW For all your construction needs and renovations Interior painting Exterior painting Ceiling and cornice painting Varnishing building alterations Breaking out of walls Building new walls Building retainer walls Plastering Building in door frames Building in window frames Paving general maintenance handyman - Plumbing Electrical Hanging of doors Fixing of cupboard hinges and door handl ...
Generally, in the United States, there are few legal issues if an unpaid homeowner works on a project within their own home, with some exceptions. Some jurisdictions require paid handymen to be licensed and/or insured. New Jersey, for example, requires all handymen who work in for-profit businesses serving residential and commercial customers, to be registered and insured.[21] Often handymen are barred from major plumbing, electrical wiring, or gas-fitting projects for safety reasons, and authorities sometimes require workers to be licensed in particular trades. However, minor plumbing work such as fixing water taps, connecting sinks, fixing leaks, or installing new washing machines, are usually permitted to be done without licensing. Many handymen are insured under a property damage liability policy, so that accidental property damage from negligence or accidents are covered.
While you’re at it: If you don’t have a programmable thermostat, consider getting one. According to the U.S. Department of Energy, an Energy Star–rated model can save you about $180 in heating and cooling costs each year. You can buy one for about $40 and install it yourself. It’s a relatively easy job; no rewiring required. On the other hand, these are home improvement projects you should never, ever DIY.
How to DIY it: Take off the loose bar by removing the screws on each of the posts that mount the bar to the wall. (If one side is solidly attached, leave it alone.) With the mounting plate now exposed, try tightening 
the screws in it. If that doesn’t work, remove it. Chances are you’ll find two plastic anchors underneath. Poke them with 
a screwdriver and let them fall inside the wall. Replace with bigger, stronger metal toggle 
anchors (above), sold at hardware stores. Just drive them into the existing holes with a drill 
or a screwdriver, and then re­attach everything.
You may qualify if all of the following apply to your household:A child under six resides in your home or spends at least six hours per week in your home on a regular basis You have owned and lived in your home for more than one yearYour home was built before 1978You live in one of these city neighborhoods:Bond Hill, Westend, Over-The-Rhine, Mt. Auburn, CUF, Corryville, Madisonville, Avondale, South Cumminsville, North and South Fairmount, West, East and Lower Price Hill, Walnut Hills, Evanston Northside or Carthage
Every remodeling job starts off with home building plans including detailed floor plans. Next comes the demolition (and a great opportunity to vent off some steam). We can offer you advice on all home renovation jobs big and small, from building modular homes to log homes and from home theater design to closet design. See All Building & Home Improvement
Plumbing vent boots can be all plastic, plastic and metal, or even two-piece metal units. Check plastic bases for cracks and metal bases for broken seams. Then examine the rubber boot surrounding the pipe. That can be rotted away or torn, allowing water to work its way into the house along the pipe. With any of these problems, you should buy a new vent boot to replace the old one. But if the nails at the base are missing or pulled free and the boot is in good shape, replace them with the rubber-washered screws used for metal roofing systems. You’ll find them at any home center with the rest of the screws. You’ll have to work neighboring shingles free on both sides. If you don’t have extra shingles, be careful when you remove shingles so they can be reused. Use a flat bar to separate the sealant between the layers. Then you’ll be able to drive the flat bar under the nail heads to pop out the nails.

To fix a squeaky floor under carpet, locate the floor joists with a stud finder, then drive in a trim head screw through the carpet, pad and subfloor, and right into the floor joist. Be sure the top inch of the screw doesn’t have threads or the subfloor won’t suck down tight to the joist. We like trim screws because screws with larger heads pull down and pucker the carpet. If that happens, back out the screw and drive it back down. Keep adding screws until the squeak stops. Try these other squeaky floor fixes.

When you use the Handy app or website, you’ll be connected with local handyman professionals who can take care of this work for you. In addition to freeing up your time for the more important things in life, booking a handyman through the Handy platform will give you the security of knowing that things are being handled by an expert. If the sight of a hammer or screwdriver fills you with anxiety and you’d rather leave things to a professional, the Handy platform is ready to help.


If you can’t see any telltale flow marks, and since the stain is fairly small, look at the underside of the roof for ‘shiners.’ A shiner is a nail that missed the framing member, in this case when the carpenter nailed the roof sheathing to the rafters. Moisture that escapes into the cold attic from the rooms below often condenses on cold nails. Sometimes you can spot this if you climb up into your attic on a cold night. The nails will look white because they’re frosted. When the attic heats up a bit during the day, the frost melts and drips, then the nails frost up at night again and so on. The solution is to simply clip the nail with a side-cutting pliers.
A garbage disposal is a bit scary when it’s turned on and the blades are noisily chopping up kitchen waste. But, if your disposal gets stinky, fear not. It’s easy to clean out the gunk and get rid of the smell. If the splash guard needs replacing, you can do that in 20 minutes! If you need to replace the entire disposal you can replace it yourself.
Tired of listening to those cabinet doors bang shut? Peel-and-stick door and drawer bumpers are the solution. Get a pack of 20 at a home center for a few dollars. Make sure the back of the door is clean so the bumpers will stick, then place one at the top corner and another at the bottom. Plus: Keep your kitchen (and whole house!) clean with these 100 brilliant cleaning hacks.

Our handyman services extends to : Window installation ºHanging of picture frames , mirrors , curtains & blinds • Changing of door locks and handles • Kitchen cabinets installation • Built-in cupboards installation and repairs • Replacement of broken cupboard hinges • Shower door installations • Bedroom closets installation • Putting up shelves • Door hanging and refurbishment • Repair swollen/jam ...


Inspect and replace your engine air filter. Just unscrew or unclip the air filter box retainers and remove the old filter. Then hold a shop light behind the filter to see how much light passes through. If the filter blocks 50 percent of more of the light, replace the filter. If not, put it back in, secure the air filter box cover and keep driving. Get the full step-by-step on changing your air filter here. It’s one of the easier things you can do to fix up cars.
Repairs often mean simple replacement of worn or used components intended to be periodically renewed by a home-owner, such as burnt out light bulbs, worn out batteries, or overfilled vacuum cleaner bags. Another class of home repairs relates to restoring something to a useful condition, such as sharpening tools or utensils, replacing leaky faucet washers, cleaning out plumbing traps, rain gutters. Because of the required precision, specialized tools, or hazards, some of these are best left to experts such as a plumber. One emergency repair that may be necessary in this area is overflowing toilets. Most of them have a shut-off valve on a pipe beneath or behind them so that the water supply can be turned off while repairs are made, either by removing a clog or repairing a broken mechanism.
Some Service Professionals are employees, franchisees, dealers, or independent contractors ("Corporate SP's") of larger national or corporate accounts ("Corporate Accounts"). In such event, you may be matched with the Corporate Account entity or with one of their Corporate SP's. The above screening criteria is not applicable to Corporate Accounts, and therefore, HomeAdvisor does not screen the Corporate Accounts or Corporate SP's.
In 2009, there were national handyman service firms which handle such nationwide tasks as public relations, marketing, advertising, and signage, but sell specific territories to franchise owners. A franchise contract typically gives a franchise owner the exclusive right to take service calls within a given geographical area. The websites of these firms put possible customers in touch with local owners, which have handymen and trucks. Customers call the local numbers. Typically these firms charge around $100/hour, although fees vary by locality and time of year. In many parts of the world, there are professional handyman firms that do small home or commercial projects which claim possible advantages such as having workers who are insured and licensed. Their branch offices schedule service appointments for full-time and part-time handymen to visit and make repairs, and sometimes coordinate with sub-contractors.
When drafting an agreement, err on the side of being too specific. If a new French door is to be installed and painted, the agreement should stipulate the type of door, where it will be purchased, who will purchase it, whether it will be primed and painted and how many coats, the lockset that will be installed, whether the doorway will be weather-stripped, and that it will properly clear carpet or rugs when opened. Include language that work areas will be left broom clean, and, if possible, make material disposal part of the company’s job.
Everything was simply unforgettable! I responded to an ad for Black Friday Special: name your price for the job with no reasonable offer refused! I emailed the company letting them know I wanted some rotten wood replaced on the window dormer and a ceiling repaired and painted. Mike said he would trust what and wanted and the price of $400.00. The carpenter and the painter arrived early. Mike arrived shortly and went over what needed to be done. I had purchased treated lumber so Mike purchased with receipt the correct wood. The carpenter quickly saw that more rotten wood had to be replaced than anticipated. The carpenter had to do wood cutting to frame and restore the dormer as well as insulate, caulk and prime the untreated wood. Needless to say, the handyman special turned out to be a skillful carpentry job. Mike, nevertheless kept the price at $400.00, which also included the plaster repair for the ceiling as well as painting the entire ceiling. I had been told in the past by two contractors that the ceiling job was complicated. Mike and his painter made the job uncomplicated and the result was simply great!
Before you go through the trouble of repainting a ceiling to get rid of a water stain, try this trick. Spray the spot with a bleach and water solution (10 percent bleach), and wait a day or two. If it’s an old stain, use a mold and mildew remover from the grocery store. You’d be surprised how often the stain disappears by the next day. It works on both flat and textured ceilings.
Upholstery shops charge almost $200 to fix tears in your seats. You can do it yourself in a few hours with a vinyl and leather repair kit (less than $20) from any auto parts store. You’ll have to practice a bit to get the right color mix and it might not be a perfect match when you’re done, but it’s a heck of a lot better than driving around with torn seats. Start by gluing reinforcing fabric onto the underside of the torn vinyl or leather. Then mix the heat-set filler to match your fabric color and apply it to the tear. Next, find a textured mat that most closely resembles the texture of your vinyl or leather and place it onto the liquid filler. Heat the patching tool with a clothes iron and press it onto the textured mat. Remove the patching tool, but leave the textured mat in place until the patch cools. Then peel it off. Get the full story on repairing leather here.
×